On request whe can place a new batterypack.
Saturday, June 28, 2014
Optoelectronics APS105 used in good working condition, battery dead. http://www.hissink.nl
On request whe can place a new batterypack.
Small voice recorder body worn info@hissink.nl www.hissink.nl
GPS watch with SOS button www.hissink.nl info@hissink.nl
TK106 GPS Tracker small with magnets in body www.hissink.nl info@hissink.nl
- Support non-server based location
- Location memorization
- Auto location report
- Authorize / delete the tracking phone number
- Covert alert & voice surveillance
- Movement alert: alert in case of movement
- Speed alert: alert in case of excess of the predefined speed.
- Power alert
- Weight: 230g
Small voice recorder with 2GB body worn www.hissink.nl
Hidden camera button version with verry small DVR body worn www.hissink.nl
1000Tvl camera with 30mm pinhole lens info@hissinl.nl www.hissink.nl
Pinhole camera 600Tvl D-WDR 3,7mm info@hissink.nl www.hissink.nl
info@hissink.nl www.hissink.nl
Pinhole camera 700Tvl 3,7mm 12V hidden camera info@hissink.nl verborgen camera
Verborgen camera.
Small pinhole camera with audio http://www.hissink.nl
600Tvl 0,5 Lux
info@hissink.nl
Mini 600tvl hidden camera www.hissink.nl verborgen camera
0,5 Lux
info@hissink.nl
Wednesday, June 18, 2014
LED BUREAULAMP LOEPLAMP MET VERGROOTGLAS 5 DIOPTRIE - 6W - 64 st.- WIT, ROLSTATIEF MOGELIJK lampshop.nl
LED BUREAULAMP/LOEPLAMP MET VERGROOTGLAS 5 DIOPTRIE - 6W - 64 st.- WIT.
Led loeplamp
Ideaal voor allerlei precisiewerk en tevens uitstekend geschikt voor gebruik bij u thuis. Geleverd met een 5-dioptrie lens (vergroting 2.25x). U kunt de goed uitgebalanceerde arm gemakkelijk in de juiste positie plaatsen. De 64 leds zorgen voor een krachtige verlichting.Zeer laag verbruik ; SLECHTS 6W Bevestiging dankzij een tafelklem.
Kenmerken
- 64 witte leds
- 5 dioptrie
- tafelklem
- in optie:
- statief met wielen: VTLAMPST
- tafelstandaard: VTLAMPST1
Specificaties
- kleur: wit
- aantal LEDs: 64
- dioptrie: 5x
- afmetingen:
- arm: 86 cm
- loep: Ø 145mm
- voeding: 230Vac / 6W
- kabellengte: 1.5m
- gewicht: 2950g
Megafoon Megafoons Megaphone Megaphones Megafoon kopen Megafoon kiezen Megafoon huren Megafoons kopen Megafoons huren Megafoons kiezen
Megafoon Megafoons Megaphone Megaphones Megafoon kopen Megafoon kiezen Megafoon huren Megafoons kopen Megafoons huren Megafoons kiezen.
Kijk op http://www.megafoonshop.nl
Donpisha (made by Sony) 3ccd color vision camera module NO LENS with power cable mail info@hissink.nl
Donpisha (made by Sony) 3ccd color vision camera module NO LENS with power cable.
Lens on request.
Ernitec TV Zoom Lens Cmount 16-160mm f1:1.8 used but in top condition mail info@hissink.nl
Ernitec TV Zoom Lens Cmount 16-160mm f1:1.8 used but in top condition.
Pipe and Wall inspection spare cable with wheel new for model no: CR110-7D mail info@hissink.nl
Pipe and Wall inspection spare cable with wheel new for model no: CR110-7D NEW.
M42 1000mm mirror lens used use it with adapter M42 to C-mount on your CCTV camera mail info@hissink.nl
M42 1000mm mirror lens used
Watec WAT-902A camera with Rainbow H6mm f1:1.2 lens used mail info@hissink.nl
Watec WAT-902A camera with Rainbow H6mm f1:1.2 lens used.
Sony XC-55 CCD Camera Module New in the Box mail info@hissink.nl
XC-55 XC-55BB
Pick up device
1/3-inch Interline transfer Progressive Scan CCD
Effective picture elements
659(H) x 494(V)
Cell size
7.4μm x 7.4μm
CCD horizontal drive frequency
12.2727MHz
Signal systems
EIA/Progressive Scan
Number of video output pixels
646(H) x 485(V)
Lens mount
C mount NF mount
Flange back
17.526mm 12.0mm
Horizontal frequency
15.734kHz
Vertical frequency
59.94Hz/30Hz
Sync System
Internal/External(auto)
External sync system
HD/VD(2 to 5Vp-p)
External sync allowance
Horizontal sync frequency±1%
Jitter
less than ±50n sec.
Output modes
1I: 2:1 Interlaced(1/60 sec.x2)
1N: Non-Interlaced(1/30 sec.)
Horizontal resolution
500 TV lines
Sensitivity
400lx, F5.6 (0dB)
Minimum illumination
0.5lx (AGC, F1.4)
S/N ratio
56dB
Gain
AGC(0 to 18dB)/ FIX(0dB)/Manual(0 to 18dB)factory setting : fixed same level
Gamma
ON(γ =0.45)/OFF(γ =1)(Internal switch selection•factory setting:OFF)
Normal shutter
1/100, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000 sec.
Trigger shutter
1/4 to 1/100,000sec.
(E-DONPISHA
II) HD/VD(2 to 5Vp-p)
Power requirements
DC+12V(+10.5 to +15V)
Power consumptions
1.8W 2.2W
Weight
110g CHU:40g / CCU:100g
Operating temp./mois.
-5 to +45°C/20 to 80%
Storage temp./mois.
-25 to +60°C/20 to 95%
Vibration resistance
10G(XYZ directions)
Shock resistance
70G
MTBF
98,600Hrs 94,900Hrs
Regulations
UL1492, FCC Class A Digital Device, CE(EN50081-1+EN50082-1), AS4251.1
Supplied accessories Lens mount cap(1), Operating Instructions(1)
Sony XCI-SX1 Used camera mail info@hissink.nl SOLD!
PDF
http://pro.sony.com/bbsccms/assets/files/mkt/indauto/Brochures/xci-sx1.pdf
Sony web
http://www.pro.sony.eu/biz/lang/en/eu/product/smartcams/xci-sx1/overview
XCI-SX1
B&W SXGA Progressive Scan
Sony Smart Camera
(View brochure in Adobe PDF)
The XCI-SX1 is Sony's first Smart camera in a new series of products for the emerging machine vision industry. This monochrome camera is designed to provide OEMs, system integrators and vision tool manufacturers a rugged, robust component, combining the imager, intelligence and interface in a single plug-in modular that is simple to set up and easy to integrate for efficient factory workflow. Integrators can install a variety of image-processing software applications or develop and apply customized applications to meet specific user needs. Unlike conventional machine vision cameras, images captured by the XCISX1 are processed within the camera and the processed data is directly transmitted to a PC over a network.
The XCI-SX1 monochrome camera incorporates a 1/2 type progressive scan CCD with square pixels that produces high-quality SXGA (1280 x 1024) images at selectable frames rates of either 15 fps (SXGA) or 34ps (VGA). Sony gives you options. Just like a PC, this camera features a standard x86 processor running built-in Linux® or loadable Windows® XPe operating system. The XCISX1 also includes an integrated 258MB SDRAM and extensive I/O connectivity via Ethernet, USB serial port and monitor out.
Features
1/2 type progressive scan CCD with square pixels
High resolution SXGA images (1280 x 1024) captured at 15 fps
High performance 400 MHz Geode GX533 processor
x86-compatible architecture
258 MB main memory (DDR-SDRAM) and 1MB flash memory
Integrated 128 MB Compact Flash™ memory card
Low power consumption
Linux® based operating system built-in
Loadable Windows XPe (SDK option)
Various Interfaces: 10Base-T/100-Base-TX interface for network operation, Monitor output, USB1.1,
RS-232C serial interface and digital input/output
Partial Scan and binning functions
External trigger input
Trigger delay function
C Mount
Compact and lightweight 55(W) x 55(H) x 110(D) mm / 400 g
High shock and vibration resistance
XCISX1 Specifications Image Device 1/2 type Progressive Scan CCD
Effective Pixel Elements 1,280 x 1,024 (SXGA)
Cell Size 4.65 x 4.65 um (H x V)
Frame Rate 15 fps (SXGA)
Gain Control Manual (0 to 18 dB, 1 dB step)
Lens Mount C Mount
Electronic Shutter 2 to 1/50,000 s (trigger mode)
2 to 1/100,000 s (free run mode)
Binning Function Vertical / Horizontal Binning
Partial Scanning Function Vertical Random Scanning - 32 to 1,024 lines, 32 line steps
Horizontal Random Scanning - 384 to 1,280 pixels, 128 pixel steps
Typical Frame Rate - 34 fps (VGA), 21 fps (XGA)
Sensor: External Trigger Input Pulse-edge detection mode/pulse-width detection mode
Sensor: External Delay Function 0 to 4 s, 1ms steps
Sensor: Hardware Look Up Table Gamma compensation, binarization, negative/positive reverse
Processor: CPU X86, AMD Geode GX 533, 400 MHz
Processor: Memory 258 MB DDR-SDRAM
128 MB Compact Flash
Processor: Operating System Monta Vista Linux Professional Edition 3.0 (built-in)
Processor: Operating System Windows XPe (downloadable SDK option)
Interfaces: Ethernet 10Base-T/100 Base-TX
Interfaces: Monitor Output D-sub 15 pin for multi scan monitor
Interfaces: USB Version 1.1
Interfaces: Serial Interface RS-232C
Interfaces: Digital I/Os TTL IN/OUT, Isolated IN/OUT, Trigger IN, Exposure OUT
Minimum Illumination 4 lx (F1.4 +18 dB Gain)
Power Requirements 10.5 to 26.4 V
Power Consumption 7.8 W
Dimensions 55 x 55 x 110 mm (2-1/4 x 2-1/4 x 4-3/8 inches)
Mass 400 g (14 oz)
Operating Temperature -5 to +45° C (23 to 113°F)
Storage Temperature -20 to +60° C (-40 to 140°F)
Operating Humidity 20 to 80% non condensing
Storage Humidity 20 to 95% non condensing
Vibration 10G (20 to 200 Hz)
Shock Resistance 70G
Regulations 70G
http://pro.sony.com/bbsccms/assets/files/mkt/indauto/Brochures/xci-sx1.pdf
Sony web
http://www.pro.sony.eu/biz/lang/en/eu/product/smartcams/xci-sx1/overview
XCI-SX1
B&W SXGA Progressive Scan
Sony Smart Camera
(View brochure in Adobe PDF)
The XCI-SX1 is Sony's first Smart camera in a new series of products for the emerging machine vision industry. This monochrome camera is designed to provide OEMs, system integrators and vision tool manufacturers a rugged, robust component, combining the imager, intelligence and interface in a single plug-in modular that is simple to set up and easy to integrate for efficient factory workflow. Integrators can install a variety of image-processing software applications or develop and apply customized applications to meet specific user needs. Unlike conventional machine vision cameras, images captured by the XCISX1 are processed within the camera and the processed data is directly transmitted to a PC over a network.
The XCI-SX1 monochrome camera incorporates a 1/2 type progressive scan CCD with square pixels that produces high-quality SXGA (1280 x 1024) images at selectable frames rates of either 15 fps (SXGA) or 34ps (VGA). Sony gives you options. Just like a PC, this camera features a standard x86 processor running built-in Linux® or loadable Windows® XPe operating system. The XCISX1 also includes an integrated 258MB SDRAM and extensive I/O connectivity via Ethernet, USB serial port and monitor out.
Features
1/2 type progressive scan CCD with square pixels
High resolution SXGA images (1280 x 1024) captured at 15 fps
High performance 400 MHz Geode GX533 processor
x86-compatible architecture
258 MB main memory (DDR-SDRAM) and 1MB flash memory
Integrated 128 MB Compact Flash™ memory card
Low power consumption
Linux® based operating system built-in
Loadable Windows XPe (SDK option)
Various Interfaces: 10Base-T/100-Base-TX interface for network operation, Monitor output, USB1.1,
RS-232C serial interface and digital input/output
Partial Scan and binning functions
External trigger input
Trigger delay function
C Mount
Compact and lightweight 55(W) x 55(H) x 110(D) mm / 400 g
High shock and vibration resistance
XCISX1 Specifications Image Device 1/2 type Progressive Scan CCD
Effective Pixel Elements 1,280 x 1,024 (SXGA)
Cell Size 4.65 x 4.65 um (H x V)
Frame Rate 15 fps (SXGA)
Gain Control Manual (0 to 18 dB, 1 dB step)
Lens Mount C Mount
Electronic Shutter 2 to 1/50,000 s (trigger mode)
2 to 1/100,000 s (free run mode)
Binning Function Vertical / Horizontal Binning
Partial Scanning Function Vertical Random Scanning - 32 to 1,024 lines, 32 line steps
Horizontal Random Scanning - 384 to 1,280 pixels, 128 pixel steps
Typical Frame Rate - 34 fps (VGA), 21 fps (XGA)
Sensor: External Trigger Input Pulse-edge detection mode/pulse-width detection mode
Sensor: External Delay Function 0 to 4 s, 1ms steps
Sensor: Hardware Look Up Table Gamma compensation, binarization, negative/positive reverse
Processor: CPU X86, AMD Geode GX 533, 400 MHz
Processor: Memory 258 MB DDR-SDRAM
128 MB Compact Flash
Processor: Operating System Monta Vista Linux Professional Edition 3.0 (built-in)
Processor: Operating System Windows XPe (downloadable SDK option)
Interfaces: Ethernet 10Base-T/100 Base-TX
Interfaces: Monitor Output D-sub 15 pin for multi scan monitor
Interfaces: USB Version 1.1
Interfaces: Serial Interface RS-232C
Interfaces: Digital I/Os TTL IN/OUT, Isolated IN/OUT, Trigger IN, Exposure OUT
Minimum Illumination 4 lx (F1.4 +18 dB Gain)
Power Requirements 10.5 to 26.4 V
Power Consumption 7.8 W
Dimensions 55 x 55 x 110 mm (2-1/4 x 2-1/4 x 4-3/8 inches)
Mass 400 g (14 oz)
Operating Temperature -5 to +45° C (23 to 113°F)
Storage Temperature -20 to +60° C (-40 to 140°F)
Operating Humidity 20 to 80% non condensing
Storage Humidity 20 to 95% non condensing
Vibration 10G (20 to 200 Hz)
Shock Resistance 70G
Regulations 70G
Subscribe to:
Posts (Atom)